Buy 2 or more: $396.96 each
Have a Question? Ask Our Pros!
Average Rating
There are no reviews for this product yet. Be the first.
Totality Wood Treatment creates an effective and treated barrier to the structure by either pre-treating the wood structural or treating the lumber once it has been installed by spraying, brushing, or foaming applications. Total coverage of the wood must be completed for optimal insect wood-destroying control.
Applying Totality Wood Treatment to both wood and wood based products will protect those treated products from damage for up to 2 years from carpenter ants, subterranean termites, drywood termites, formosan termites, ambrosia beetles, deathwatch beetles, false powder-post beetles, powder-post beetles, old-house bores and others.
Totality saves you time and money per job because only 1 coat is required versus 2 coats for borate products. Treated wood was found to have 2,800 ppm of bifenthrin after 6 years and was detected up to a depth of 8mm (5/16").
Product Documents
Active Ingredient | Bifenthrin 23.4% |
---|---|
Target pests | Subterranean termites, Dry-wood Termites, Formosan Termites, Ambrosia Termites, Power-post Beetles and other wood-destroying insects |
For use in | Commercial & Residential: Homes and Buildings |
Application | 3.2 oz. for 0.6% solution to 1 gallon of water |
Yield |
1 qt/32 oz 6% yields: * 10 gallons (compressed sprayer) * 100 gallons (power sprayer & emulsion) |
Formulation | Professional Product |
NOT FOR SALE TO | CT, NY, VT (Restricted To Licensed Applicators Only) |
Shipping Weight | 2.46 lbs |
Manufacturer | FMC (Mfg. Number: 11008360) |
EPA Registration | 279-3281 |
Totality Wood Treatment is a new product formulation that provides the control and prevention of termites and other wood destroying insects. The Totality formulation comes with a low use rate, 3.2 fl oz per gallon of water for a 0.6% finished dilution. It saves pest management professionals time per service visit as only 1 coat is required, compared to 2 coats that is needed for competitive borate products.
From a performance standpoint, published university data indicates the bifenthrin provides effective termite repellency and mortality. Specifically, befenthrin kill termites at levels as low as 0.001 ppm in soil. Combine this data with additional FMC research and a new and superior product in wood treatment applications emerges. Totality treated wood was found to have up to 2,800 ppm of FMC bifenthrin after 6 years. Also, the FMC bifenthrin of Totality was detected in wood up to a depth of 8mm after 6 years.
Totality Wood Treatment forms an effective, treated barrier to the structure by either pre-treating structural wood or by treating lumber once installed by spraying, brushing, and foaming applications. Complete coverage of the wood is essential for optimal wood destroying insect control.
The application of Totality Wood Treatment to both timber and timber based products as specified in the application instructions will protect treated products from damage for up to two years from drywood and subterranean termites (including Formosan termites), carpenter ants, ambrosia beetles, powder post beetles, false powder post beetles, deathwatch beetles, old house borers and others.
Totality Wood Treatment is intended to be applied only to bare wood, plywood, particle board or other cellulose building materials in the absense of paint, stains or sealers. Such materials will prevent Totality Wood Treatment from properly adhering to cellulose surfaces.
There are no reviews for this product yet. Be the first.
There are no questions for this product yet. Ask the first.