Buy 2 or more: $33.85 each
Have a Question? Ask Our Pros!
Hydretain RTS has Hydretain's root zone moisture management technology with a non ionic surfactant that is environmentally sound and a renewable resource that will improve soil penetration. This is designed to reduce watering by 50% for plants and turf. It is made of a new chemistry that is neither a superabsorbent polymer or a wetting agent. Hydretain attracts free water molecules from the air, acting like water magnets - this vapor is usually unable to be used by plants and goes back into the air. Hydretain uses this water vapor and turns it into a liquid form that transfers it to the plant roots. This product will help keep plants and turf alive and green. Hydretain saves water usage, lowers labor and cost and provides a greener outcome.
This quart bottle comes in a ready to spray bottle that attaches easily to a garden hose.
Product Documents
| Active Ingredient | Humectant - 54% 10% Non-Ionic Surfactant |
|---|---|
| For use in | Lawn and Garden, Golf and Sports Fields, Nursery and Greenhouses, Landscapes, Farming and Agriculture |
| Application |
Application: Break tab on Hose-end sprayer before turning knob to the on position. Turf: General application rate - Through hose-end sprayer apply 9 oz. per 1,000 sq. ft. once every 3 months or maintain monthly at 1/3 rate after initial full rate application. One quart treats up to 3,500 Sq. Ft. For best results apply to wet soil. Water in with at least 1/10 inch of water within the first hour to insure Hydretain ES Plus is washed off foliage and into the soil. Within 24 hours, follow with enough additional water to carry Hydretain down to and throughout the root zone. (The amount of additional water required to carry Hydretain throughout the root zone is dependant on the depth of the root zone of the treated area. Usually 1/4 to 1/2 inch of water is required.) Additional Hydretain may be required to correct difficult and extreme dry spot areas. Hydretain may be applied at up to 5 times the general application rate as a single treatment or in multiple applications. Seeding, Sodding, Sprigging: Through hose-end sprayer apply Hydretain at general application rate of 9 oz. per 1,000 sq. ft. after seeding, sodding or sprigging. Water in with only enough water to rinse Hydretain off foliage and into the soil at seed level or the root area of new sod or sprig. An application of Hydretain made prior to overseeding, and watered into the root zone will manage soil moisture for existing turf during new turf establishment. Trees, Shrubs & Individual Plants: Through hose-end sprayer thoroughly saturate the root zone or dilute Hydretain at a rate of 2 oz. per gallon of water and apply by drench thoroughly saturating the root zone. For maximum effectiveness on trees apply 1 to 2 ounces of concentrate for each 1/4 inch of trunk diameter. Large Planters & Gardens: Through hose-end sprayer thoroughly saturate the root zone of individual plants or generally apply at a rate of 2 ounces of concentrate per 60 sq. ft of area. One quart treats up to 1,000 square feet. For Best Results: Water thoroughly when re-watering Hydretain treated plants. Proper fertilization will enhance Hydretain's effectiveness. Hydretain is biodegradable. For maximum effectiveness reapply every three months or when required watering becomes more frequent. Reapply if a reduction in watering is not apparent within the first two weeks. Caution: If Hydretain ES Plus is applied to open flowers blooms, rinse with water plain water |
| Shipping Weight | 3.05 lbs |
| Manufacturer | Ecologel Solutions, LLC |
| UPC | 768103010325 |
Q. How do You Apply Hydretain?
A. Hydretain is a concentrated liquid solution which must be diluted before applying. It may be applied by spray or drench. The Hydretain quart bottle has a ready to use hose-end proportioner applicator which dilutes as it sprays. Just attach a garden hose, break off the safety tab, turn the knob to the “on” position and begin applying. For maximum coverage, use broad spray strokes allowing for up to a 20' swath (10 feet in either direction). After applying, water in thoroughly.
Q. Hydretain comes out of the bottle too fast. How can I get the desired coverage?
A. The hose-end applicator’s dilution and application rates are based on water pressure and volume. If your water pressure and volume are high you will have to move more quickly to achieve the desired coverage. If you cannot move quickly enough turn down the water volume at your hose bib.
Q. Hydretain is not coming out of the hose-end sprayer, what should I do?
A. Make sure the knob is in the ON position. If it is in the ON then take bottle off of the hose-end applicator and make sure the plastic tube is attached. If not, reattach.
Q. When is the best time to apply Hydretain?
A. Hydretain can be applied anytime during a plant's life cycle. However, the best time to apply Hydretain is before hot dry weather or drought stress conditions set in.
Q. Where can you use Hydretain?
A. Hydretain is effective on all types of ornamental plants, shrubs, trees and turf grass, as well as food producing agriculture. Hydretain is beneficial for containerized and field grown plants from seed germination or propagation to transplant establishment and throughout the growing life cycle.
Q. Will Hydretain hold too much water if we get heavy rain fall?
A. Hydretain has little moisture holding capacity. Its function is soil moisture management and functions by converting otherwise unavailable soil humidity available to plant roots.
Q. Will Hydretain wash through the soil if we get heavy rainfall?
A. Hydretain may wash through the soil if heavy rainfall follows closely after application before Hydretain has time to attach to plant roots. Hydretain is usually drawn up against roots within the first one to 2 required waterings after application.
Q. Why does Hydretain need to be watered in right after application?
A. Hydretain needs to be watered in right after application so that it is driven down to and throughout the root zone where it can be drawn up against tiny roots. If allowed to remain on the surface or within the thatch area Hydretain will attach to organic materials i.e. plant tissue or thatch, and its migration into the root area, with subsequent waterings, will be too slow to show it full effectiveness.
Q. Is Hydretain a replacement for fertilizer?
A. No. Hydretain is not a plant food ingredient and is not a replacement for fertilizer. However, Hydretain’s soil moisture management function has shown to improve nutrient uptake thereby amplifying fertilizer applications.
There are no reviews for this product yet. Be the first.
There are no questions for this product yet. Ask the first.
Hydretain RTS
Rating: 4.2 (0 Reviews / 0 Q&A)
