Buy 2 or more: $71.52 each
Have a Question? Ask Our Pros!
CAL FLO Liquid Limestone is easy to use, non-hazardous, ideally when a rapid soil pH change is needed, such as in agricultural, turf, and land reclamation applications. It quickly adds calcium to the soil, and can improve pH by up to 1 point in as few as 10 days. Normally, 2 to 3 gallons per acre can adjust pH by at least 1/2 point, and 4 to 6 gallons will adjust it 1 point. CAL FLO Liquid Limestone needs little maintenance to do its work, is environmentally friendly and it leaves no dust residue from its application.
Please note: This product is a suspension and not a solution, so agitation is required during mixing and during spraying, especially when using large capacity spray equipment.
Product Documents
| Active Ingredient | Calcium - 25.08% Magnesium - 0.37% Calcium Oxide Equivalent - 35.11% Calcium Carbonate - 62.7% Magnesium Carbonate - 1.29% |
|---|---|
| For use in | Greenhouse, Nurseries, Golf Courses, Sod Farming, Hydro Seeding |
| Application |
Commercial Spray Equipment: 1 gallon per 30 gallons of water (2 1/2 - 5 gallons per acre) Lawn and Garden: 1 cup per 2 gallons of water * See label for complete application instructions |
| Pet safe | Yes, if used as directed on label |
| Formulation | Professional Product |
| Shipping Weight | 29.90 lbs |
| Manufacturer | Burnett Lime Company, Inc. (Mfg. Number: 100083450) |
INTRODUCTORY INFORMATION
CAL FLO Liquid Limestone is a specifically microsized suspension that maximizes the efficiency of limestone for pH adjustment. Course dry liming materials are unevenly spread over treated surfaces and difficult to handle. CAL FLO Liquid Limestone has no dust and provides an even particle distribution with the use of proper dispensing equipment. CAL FLO Liquid Limestone offers the finest calcium carbonate particulates available in suspended form. Ultra-fine limestone solids will react more rapidly to achieve the desired pH, when compared to the typical dry bagged limestone. CAL FLO Liquid Limestone can improve soil pH on contact for more nutrient absorption from coinciding fertilizer feed rates.
For a wide variety of soil treatments, 2 1/2 to 5 gallons per acre has proven to be the accepted application rate. Typically, a soil pH in the low 6 range will use 2 1/2 gallons per acre, while a pH below 6 may require 5 gallons per acre. Instant pH increases can be expected after a soil treatment and pH buffering should last for up to 3 months. CAL FLO Liquid Limestone enhances the pH of the soil germination zone to improve the quality of the planting. NOTE: For best results, regular soil testing is recommended.
NOTE FISH PONDS: For best results, water analysis should determine application rate. For treatment of fish ponds requiring pH adjustment or improved alkalinity. CAL FLO Liquid Limestone is designed to improve the pond environment and offer easy liquid application as well.
DIRECTIONS
Using commercial spray equipment, fill dilution tank half full with water and start agitation. Add the correct amount of CAL FLO Liquid Limestone and finish filling the mixing tank. Suggested dilution rate for general use is 30 gallons of water to one gallon of CAL FLO Liquid Limestone depending upon the type of equipment being used. CAL FLO Liquid Limestone is well suited for hydro seeders, greenhouse irrigation systems, and boom sprayers.
For home lawn and garden spray equipment, add one cup of CAL FLO Liquid Limestone to 2 gallons of water. Shake mixture in a hand-held tank or backpack tank before spraying.
A general application rate for diluted spray is one gallon to 600 square feet for instant pH adjustment. For prolonged pH maintenance reapply CAL FLO every 8 to 12 weeks.
Regular soil pH testing is recommended to determine the amount of lime and the application intervals. CAL FLO Liquid Limestone is specifically designed for complete neutralization of the following:
Reapply CAL FLO Liquid Limestone as needed during the growing season. General pH maintenance is needed every 2 months based upon soil buffers.
For Fish Ponds, general application rates are 2 1/2 gallons per surface acre of water. If commercial spray equipment is used, add one gallon of CAL FLO to 30 gallons of water and project the dilution on to the water to be treated. If CAL FLO is applied from a boat, slowly pour CAL FLO from a moving boat, letting the motor serve as a mixer. NOTE: For best results, water analysis is recommended to accurately determine application rate.
There are no reviews for this product yet. Be the first.
There are no questions for this product yet. Ask the first.
CAL FLO Liquid Limestone
Rating: 4.6 (0 Reviews / 0 Q&A)
